Reset of Diesel particle filter/Oxidation catalytic converter
This function must be performed after replacement of Diesel particle filter/Oxidation catalytic converter.
Note:
The following values are reset in the control unit:
Soot content of the diesel particle filter.
Soot content of the diesel particle filter (simulated value).
Ash content of the diesel particle filter.
Odometer reading at the last regeneration.
Test conditions:
Ignition on, engine off.
No faults in the system.
Procedure:
Start the function and follow the instructions in the program.
The function is done.
If the function fails, check the test conditions and repair any faults.