Replacement of tire pressure sensor
This function is used to program new identification codes for the tire pressure sensor.
Note:
In this function, you are instructed to enter the 8-character identification code.
If the identification code only consists of 7-characters, enter a zero (0) first in the row.
To complete the function, the sensors must be activated, either via the activation tool or by driving on the road with a speed over 50 km/h.
Test conditions:
Ignition on, engine off.
No fault codes should be stored in the fault memory.
Battery voltage above 12V.
Procedure:
Start the function.
Current coding is shown.
Select sensor to code.
Enter the code and press "OK".
If more sensors are to be learned, it could be done now.
When the coding is complete, the sensors must be activated.
Activate the sensors via the activation tool with ignition on or by driving on the road with a speed over 50 km/h.
The function is done.